Home » IBC Spill Pallets » Single IBC Bund

Single IBC Bund

Model: UP-1501

Single IBC Bund applies for single IBC tank (800, 1000& 1200 liters) or uneven bottom container storage and spill containment.

Note:
Compliance
Regulation of spill containmentGet a Free Quote
Single IBC Bund
Single IBC spill pallet
Dual ends forklift pockets of single IBC spill pallet
Single IBC spill pallet
Single IBC Bund
Single IBC spill pallet
Dual ends forklift pockets of single IBC spill pallet
Single IBC spill pallet

Overview

What's special for UP-1501

  • Smart grating free design for stable & economic IBC tank storage solution
  • Selected HDPE for enhanced loading capacity than most LLDPE pallet in market
  • Seamless structure reduce secondary leakage risks comparing with drain plug pallet and is more applicable for hazardous liquid storage
  • Chemical compatibility pad equipped to test whether the spill pallet could be used to store liquid.
  • Optional for galvanized coating grating

 

Product infomation

  • In compliance with EPA, SPCC, Oil storage regulation 2001, PPG26 regulations,. It’s the product meet most regulations on the market
  • High-density polyethylene (HDPE) construction resists UV rays, rust, corrosion and most chemicals
  • Perfect sump capacity of 1100 Liters to catch up all liquid in a standard IBC tank
  • Proven strong structure by 6 months’outdoor simulation loading capacity test(1500 kg)
  • Nestable design to save space in storage and transportation
  • Dual ends forklift pockets are compatible with most forklift trucks
  • Grating free design for better leakage monitoring
  • Siphon Pump as liquid discharging solution for no secondary spill on floor
  • Optional for drain plug

 

BrandUPQUARK
ModelUP-1501
Dimensions L x W x H cm (in.)165 x 155 x 71.5 ( 65x61x28″)
ColorYellow
MaterialHigh Strength Density Polyethylene (HDPE)
Weight kg (lb)65 (143)
Sump Capacity liters (gal)1100 (291)
Recommend load capacity (UDL) kg (lb)1500 ( 3307)
Forklift Channels cm (in.)Width 24.5 (9.6″), Inside Spread 14.5 (5.7″), Height 10.0 (3.9″ )
Regulation StandardEPA 40CFR 264.175, SPCC 40CFR112.7, EPA 40 CFR 122.26
StyleIBC Spill Pallets
Liquid Discharge SolutionAutomatic Discharge Pump(UP-1999)
PDS-1501
Chemical guide
Test report
It is spill containment pallet applies for IBC tank (800-1200 liters)storage and spill containment either for short term or long term.
UP QUARK single IBC bund complies with most regulatory requirements.
UPQUARK single IBC bund applies for corrosive chemical liquids. Its integrated seamless structure ensures tight connection for leakage containment.
Each UPQUARK single IBC bund is equipped with 1 pc chemical compatibility strip. When you are not quite sure about the chemical compatibility between spill containment pallet vs liquid to store, just dig the test strip in the liquid to see whether there is chemical reaction there.
Not recommend to apply UPQUARK single IBC bund for spontaneous combustion liquid. The pallet is made by high-density polyethylene, and it will melt when flammable liquid burns so the combustion will expand as the spontaneous combustion liquid flows. Steel spill containment pallet is more suitable to store spontaneous combustion liquids. Steel spill containment is sturdy and can contain leaked spontaneous combustion liquids in the pallet to prevent combustion expansion.
12 Supporting columns design eliminates grating for economic solution. Its loading capacity is verified by 6-month simulated load test of double loaded IBC tank (appointed by TUV).
The simulated load test is to simulate actual application. In fact the loading and loading application is harsher then the condition in lab . This test is conducted continuously for no less than 6 months.
The ordinary load test at 3rd party just lasts a few hours and only reflect short-term load performance. The simulated load test reflects whether the spill pallet’s performance stability in long-term.
The flexural modulus of HDPE is twice that of LLDPE, which means that the HDPE’ strength doubled LDPE’s strength. UP QUARK single IBC bund uses reinforced HDPE in order to maximize the load capacity.
Siphon pump is best way to empty leaked liquid in pallet. It will not cause secondary leakage and avoid operator’s body contact with liquid for safety consideration.
Sure! UP QUARK single IBC bund has a two-way forklift port and can be applied to most forklifts.
No, we do not recommend dynamic moving of loaded pallets.
The spill pallet should be placed indoors and avoid direct sunlight exposure. It can be stacked to save space. Pls do not impact or drop it violently.

Videos

  • Best solution to empty leakage from spill containment pallet

Related Products