Home » Oil Only Sprint Absorbent Pads & Rolls » Oil Only Sprint Absorbent Rolls – OR3M4450

Oil Only Sprint Absorbent Rolls – OR3M4450

Model: OR3M4450

Oil  Absorbent Rolls clean up all oil leaks that occur at work, including engine oil, lubricants, paint, diesel, etc.

It only absorbs oil-based liquids and hydrocarbons and repels all water. Taking advantage of its lengthen and width , this product always applies to places with frequent leaks. It can be laid on the ground to protect a large area.

Note:
  1. Cannot be used together with oil stain cleaning products such as degreasing agents.
  2. Recyclable as disposal PP. Incineration is not recommended. Self-incineration may cause fire or produce toxic and harmful gases due to the decomposition of materials and adsorbed liquids.
Compliance
Regulation of spill containmentGet a Free Quote
oil absorbent rolls
oil absorbent rolls
oil absorbent rolls
oil absorbent rolls
oil absorbent rolls
oil absorbent rolls

Overview

What's special for OR3M4450

  • Absorbing saturation achieved in 15 seconds for most oil based liquid, and its speed is 3 times faster than similar products on the market
  • More environmentally friendly foldable recycling packaging instead of disposable cartons
  • Plastic packaging will not be ruined by water and self-extinguish with fire, which reduces fire flaming risk
  • Velcro seal eliminates sealing tape and realizes fast open-up
  • Optional Fluorescent sticker to the outer packaging for fast eye-catching in emergencies such as power outages or driving at night

 

Product infomation

  • Absorbs oil and fuels, NOT water
  • Absorbs 133 liters of liquids
  • Splash white color to catch oil & fuel leakage point after leakage in saturation level
  • Water repelling feature for oil and water separating
  • Tear able design for on- site application to make cost effective spillcontainment solution
  • Polypropylene non-woven fabric on product’s 2 surface locks the adsorbed liquid and prevent debris when wiping
  • Floating on water surface for easy retrieval, even when saturated
  • Neat and dense dimple on absorbent surface enhances product strength
  • Flame retardant and self-extinguishing melt-blown polypropylene reduces fire risk and extend durability
  • Heavyweight absorbent roll doubles sump capacity of light weight roll, and is perfect for heavy large scale leakage

BrandUPQUARK
ModelOR3M4450
Fluid absorbedOils, Fuels, Other Oil-Based Liquids Only
Dimensions cm (inch)40x 5000 (16×2000″)
ColorWhite
CompositionMelt blown Polypropylene
Grammes per Square Metre400gsm
Net Weight kg (pound)8 (18)
Absorbency DurationAbout 15 seconds
Layer3 layers, SMS
Absorbency LevelHeavy-weight Construction
Absorbency per Box liter(gallon)133 (35)
Absorbency per Pad milliliter(ounce)133 (35)
Perforated Pattern cm (inch)40×25 (16×10″) sections
Sold as1 Roll per Bag
Meets Regulations29 CFR 1910.22(a)(2)
PDS-OR3M4450
MSDS of Absorbents
They are oil absorbent rolls which can work either as giant long carpets protecting entire aisle or be torn off small sheets for small leakage confinement. UPQUARK oil absorbent rolls lock liquid 12 times of its own weight. This product only absorbs oil and repels water. It can float on water even in saturation status so it always used to clean oil stains on the water. This product is perfect for fast-flowing liquids or large-area spill containment.
Clay is a traditional method for cleaning oil stains on the ground. To absorb oil the same weighted clay is needed. When apply clay for oil containment, the operator needs to hold heavy clay and constantly sprinkle it on the oil spill. Dust will be inhaled in the nasal cavity, and the mixture of clay and oil on the soles of your feet will be carried wherever you go. The clay will allow the oil to stay on the surface of the particles, and as gravity continues to act, the oil will fall back to the ground. In comparing with clay, oil absorbent absorbing rate is 10 times and it lock liquid on its fiber surface, which is more economic and environmental friendly solution.
General speaking Oil-based liquid is not corrosive, but direct contact with human body might cause eye hurt , skin irritation, or potential slipping. Therefore, some primary PPE is still needed in process of spill handling.
No ! Absorption of flammable liquids does not change its physical and chemical properties. Treat saturated absorbents with the same storage, handling and safety precautions as you would use with the liquids that has been absorbed.
We do not recommend secondary use. Used oil absorbent rolls should be disposed as waste according to the adsorbed chemical liquid as soon as possible. Improper storage will cause the liquid to react chemically with other chemicals, causing danger. UPQUARK oil absorbent rolls have easy-tear lines. For small leaks, You can tear off half of them for small leakage catch up as economic solution.
As emergency handling product, oil absorbent rolls should be fast eye-catching and easily accessible. White plastic boxes with fluorescent stickers stand out no matter where they are placed -- it is easy to spot even in a pile of cardboard boxes even in power outages or driving at night.

Videos

Related Products